52 24 199 Removing and installing/replacing rear panel on left rear seat backrest

Necessary preliminary tasks 

• Remove BACKREST FOR REAR SEAT .

Rear panel (1) on backrest.

Fig 1: Identifying Rear Panel On Backrest

Courtesy of BMW OF NORTH AMERICA, INC.

Detach rear panel (2) with flat scraper (1) from rear seat backrest.

Installation: 

Comply with instructions issued by manufacturer of universal spray adhesive.

Apply universal spray adhesive to rear panel and rear seat backrest.

Fit and align rear panel within the air drying time (see manufacturer's instructions).

Observe and adhere to curing time to prevent rear panels from slipping.

Fig 2: Detaching Rear Panel Using Flat Scraper From Rear Seat Backrest

Courtesy of BMW OF NORTH AMERICA, INC.