LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Body Equipment - Repair - E90) >> Trim, Covers, Handle Trim >> 51 13 001 Removing and installing/replacing front radiator grille, middle left or right

51 13 001 Removing and installing/replacing front radiator grille, middle left or right

WARNING: This page is about a different variant/trim than selected.

Release screws (1) and pull bumper trim (3) forwards slightly.

Release catches (4) from inside and remove central radiator grille (2) towards front.

Fig 1: Removing Central Radiator Grille Towards Front
G04752472Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

All catches and guides on middle front grille must not be damaged.

Press on chrome ring to push front radiator grille (2) into bumper trim.

Fixtures (1) must engage correctly.

Fig 2: Pushing Front Radiator Grille Into Bumper Trim
G04749590Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Release catches (1).

Remove chrome frame (2) from radiator grille (3).

Installation: 

Catches (1) on chrome frame (2) and radiator grille (3) must not be damaged.

Fig 3: Identifying Catches On Chrome Frame And Radiator Grille
G04752474Courtesy of BMW OF NORTH AMERICA, INC.