51 43 075 Removing and installing/replacing side trim panel, footwell, on A-pillar, right

Special tools required: 

• 00 9 317

Necessary preliminary tasks: 

• Remove FRONT ENTRANCE COVER STRIP (INSIDE) 
• Remove TRIM FOR INSTRUMENT PANEL, BOTTOM LEFT 

Detach mucket (1) in area of side trim panel (2).

Unclip side trim panel (2) 00 9 317 with special tool in direction of arrow at retaining points (3) and remove.

Fig 1: Detaching Mucket In Area Of Side Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, lever out clips (1) remaining in bores.

If necessary, replace faulty clips (1).

Position side trim panel (2) preinstalled with clips (1) on associated bores and clip into place.

Fig 2: Identifying Side Trim Panel And Clips

Courtesy of BMW OF NORTH AMERICA, INC.