51 34 211 Replacing rubber guide for rear left or right door window

WARNING: This page is about a different variant/trim than selected.

Special tools required:

IMPORTANT: The "INSTRUCTIONS ON FITTING WINDOW GUIDE SEALS " serve as the basis for this repair instruction and must be observed without fail.

Necessary preliminary tasks:

E91 only:

NOTE: Window cavity cover strip does not have to be removed.

Lever out rubber guide (1) on door window frame at front (2) with special tool 00 9 317 .

Fig 1: Removing Trim On Window Frame At Rear

Courtesy of BMW OF NORTH AMERICA, INC.

Pull rubber guide (1) out of window guide.

Detach rubber guide (1) in direction of arrow from door.

Fig 2: Detaching Door Rubber Guide

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Moisten rubber guide (2) prior to fitting with APPROVED ANTI-FRICTION AGENT .

Close door window glass (1) a little.

Push rubber guide (2) onto door window glass (1) and into window guide (3).

Fig 3: Pushing Rubber Guide Onto Door Window Glass And Window Guide

Courtesy of BMW OF NORTH AMERICA, INC.