51 16 212 Removing and installing trim for storage compartment

Special tools required: 

• 00 9 317

Necessary preliminary tasks: 

Version with manual transmission: 

• Remove GAITER FOR GEAR LEVER

Version with automatic transmission: 

• Remove FINISHER FOR PRESELECTOR LEVER 

Release trim (1) with special tool 00 9 317 from retainers (2).

If necessary, disconnect plug connections and remove trim (1) towards top.

Fig 1: Releasing Trim Using Special Tool 00 9 317 From Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Following parts on trim (3) must not be damaged or missing:

1. Clips
2. 4 x foam material
   Fig 2: Identifying Trim, Clip And Foam Material

   Courtesy of BMW OF NORTH AMERICA, INC.