51 71... Removing and installing/replacing multifunction pan

Necessary preliminary tasks: 

• Remove left and right luggage compartment wheel arch trims. See RIGHT SIDE  and LEFT SIDE .

Release screws (1).

Remove guide (2).

Fig 1: Identifying Guide And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Fig 2: Identifying Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove cover (2).

Fig 3: Identifying Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release nuts (1) and remove multifunction pan.

Tightening torque 51 71 9AZ .

Fig 4: Identifying Multifunction Pan Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Seals (1) on multifunction pan (2) must be replaced each time they are removed.

Fig 5: Identifying Seals On Multifunction Pan

Courtesy of BMW OF NORTH AMERICA, INC.