Aligning rear spoiler for installation
WARNING: This page is about a different variant/trim than selected.
Determine center of rear lid.
Mark dimensions (A, B, C, D and E) on adhesive tapes (1) on left and right. Adhesive tapes must not be situated on bonding surface of rear spoiler.
| Model series | A | B | C | D | E |
|---|---|---|---|---|---|
| E90 | 250 | 200 | 330 | 332 | 334 |
| E92 | 250 | 200 | 372 | 370 | 361 |
| E82 | 250 | 200 | 371 | 372 | 376 |
Clean bonding surface on rear lid and rear spoiler with spirit.
NOTE:
For cleaning, use a fluff-free disposable cloth or a clean cleaning cloth.
Air drying time at least 1 minute.