Positioning aid "C5" for rear door, left ("D5" right)
WARNING: This page is about a different variant/trim than selected.
Detach prestamped positioning aid from backing.
- Positioning aid "C5" rear door, left (door lock, bottom)
- Positioning aid "D5" rear door, right (door lock, bottom)
If necessary, cut out prestamped apertures for bore holes from positioning aid. Align positioning aid with printed marks (X, Y), bore hole and contact edge (2) to rear door and press on.
Seal must rest on positioning aid (1) during bonding.
X Start of bending radius
Y Opening for door lock