Positioning aid "C2" for rear door, left ("D2" right)

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Positioning Aid C2 For Rear Door, Left (D2 Right)

Courtesy of BMW OF NORTH AMERICA, INC.

Detach prestamped positioning aid from backing.

Positioning aid "C2" rear door, left (door stop)
Positioning aid "D2" rear door, right (door stop)

If necessary, cut out prestamped aperture (Y) from positioning aid. Align positioning aid with printed mark (X), aperture (Y) and contact edge (2) to rear door and press on.

Seal must rest on positioning aid (1) during bonding.

X Start of bending radius

Y Aperture for door stop