Position of sealing (3) on rear door

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Sealing Position On Rear Door (Only E90)

Courtesy of BMW OF NORTH AMERICA, INC.

Area (A) at distance (D) to door rabbet.

Area (B) at line (1) of positioning aids (2) to be stuck on (see following work operations).

Area (C) at distance (E) to door inner panel. Bond straightly between positioning aid "C1"/"C4" and "D1"/"D4".

Clean bonding surfaces on paint with adhesive remover (sourcing reference: BMW Parts Service).

D = 2, 8 mm

E = 55... 70 mm