Only E90, positioning aid "C6" for rear door, left ("D6" right)
WARNING: This page is about a different variant/trim than selected.
NOTE:
Positioning aid "C6" and "D6" only for E90.
Positioning aid "C7" and "D7" only for E91.
Detach prestamped positioning aid from backing.
- Positioning aid "C6" rear door, left (door lock, top)
- Positioning aid "D6" rear door, right (door lock, top)
If necessary, cut out prestamped cut-out for bore hole from positioning aid. Align positioning aid with printed marks (X, Y), bore holes and contact edge (2) to rear door and press on.
Seal must rest on positioning aid (1) during bonding.
X Start of bending radius
Y Opening for door lock