Positioning aid "A2" for front door, left ("B2" right)
WARNING: This page is about a different variant/trim than selected.
Detach prestamped positioning aid from backing.
- Positioning aid "A2" front door, left (door lock, bottom)
- Positioning aid "B2" front door, right (door lock, bottom)
If necessary, cut out aperture for bore hole from positioning aid. Align positioning aid with printed marks (X, Y), bore holes and contact edge (2) to front door and press on.
Seal must rest on positioning aid (1) during bonding.
X Start of bending radius
Y Opening for door lock