LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Body Equipment - Repair - E90) >> Front Lid Insulation Lining >> 51 48... Notes for bonding sound insulation (SI), doors >> Handling adhesive area on inner door panel

Handling adhesive area on inner door panel

WARNING: This page is about a different variant/trim than selected.
Adhesive Cleaning
  1. Butyl bead applied to sound insulation with protective film
  2. Butyl mini-round profile Ø 3 mm from the roller
  3. Butyl round profile Ø 6 mm from the roller
  1. CLEANING AGENTR2 

    Under no circumstances: paint thinning 

  2. Carry out bonding only after an air drying time ≥ 1 min. Air drying time may be omitted if the entire bonding surface is wiped with a dry cloth
  3. After cleaning, the bonding surface may not be touched with hands or fouled again
scientia non olet · About LEMON Manuals