51 21 125 Removing and installing/replacing carrier for left or right outside door handle with lock cylinder

Necessary preliminary tasks: 

• Remove OUTER HANDLE 
• Remove SOUND INSULATION 
• If necessary, close door window glass

Release Bowden cable (1) from door lock (2).

Installation: 

Bowden cable (1) must be correctly engaged in locators in door lock (2).

Bowden cable (1) must be laid without kinks in bend to door lock (2).

Fig 1: Releasing Bowden Cable From Door Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Remove seals (1) in direction of arrow.

Release screw (2).

Fig 2: Removing Seals

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, release cable holder on carrier (1).

Remove inner carrier (1) in direction of arrow and feed out of door.

Fig 3: Releasing Cable Holder On Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

If necessary, release cable connector (1).

Feed Bowden cable (2) out of carrier (3).

Fig 4: Releasing Cable Strap Feed Bowden Cable Out Of Carrier

Courtesy of BMW OF NORTH AMERICA, INC.