3.8 Nozzle preparation
WARNING: This page is about a different variant/trim than selected.
Use standard nozzle C for windscreens, rear windows, and body-specific fixed side window glass.
| A | 8 ±1 mm |
| B | 12 ±1 mm |
Prepare plastic nozzle for fixed door window glass.
| A | 8 ±1 mm |
| B | 15 ±1 mm |
Deviations are described in the vehicle-specific repair instructions.
Black ceramic glass impermeable to UV light is located on the peripheral zone of the inside of the window to protect the adhesive bead.
Ceramic glass must not be damaged.