LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Body Equipment - Repair - E90) >> Front And Rear Window >> 51 31... General procedure when dismantling/installing bonded window glass >> 3 Installation >> 3.7 Version with inspection glass for vehicle identification number in windscreen

3.7 Version with inspection glass for vehicle identification number in windscreen

WARNING: This page is about a different variant/trim than selected.

Foam tape (2) must be installed to protect the vehicle identification number (1) against tampering. If applicable, install foam tape TNR 07 14 7 222 909.

Close off the inspection glass on the windscreen (bottom left) with Sika bonding base VP 206.

Except for: 

Fig 1: Identifying Vehicle Identification Number And Foam Tape
G09850945Courtesy of BMW OF NORTH AMERICA, INC.