LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Body Equipment - Repair - E90) >> Front And Rear Window >> 51 31... General procedure when dismantling/installing bonded window glass >> 1 General information

1 General information

WARNING: This page is about a different variant/trim than selected.

Follow general INSTRUCTIONS  on window bonding.

MATERIALS  needed for window bonding.

The vehicle can be towed away or driven without a windscreen, rear window and side window.

When carrying out disassembly/installation work and during the hardening time, the vehicle must be standing on its wheels on a level surface.

The windscreen, rear window and side windows are glued to the body. This bonding will increase the torsional rigidity of the vehicle. To obtain perfect bonding, comply with the installation procedure described in the following.

scientia non olet · About LEMON Manuals