LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Body Equipment - Repair - E90) >> Front And Rear Window >> 51 31 021 Removing and installing/replacing rubber frame for windscreen (top) >> Replacement of rubber frame with removed or new windscreen

Replacement of rubber frame with removed or new windscreen

WARNING: This page is about a different variant/trim than selected.

There is no sealing lip (2) in area (A) on left/right.

Fit rubber frame (1) with tear-off lip (4).

After installing windscreen: If necessary, pull liner* off adhesive tape (6) and press rubber frame (1) down firmly on roof outer skin.

3 Butylene tape

5 Aluminium strip

Fig 1: Identifying Rubber Frame, Tear-Off Lip And Sealing Lip Area
G05503861Courtesy of BMW OF NORTH AMERICA, INC.

* Liner is the protective film on adhesive tape (6).

scientia non olet · About LEMON Manuals