51 14... Instructions for attaching number/letter designation combination: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
The model designation is attached with adhesive and can not be reused.
The model designation must be attached at room temperature >±18 ° C.
The model designation must be removed at stove-enameling temperatures exceeding 80 °C.
The model designation must be attached at room temperature >±18 ° C.
The model designation must be removed at stove-enameling temperatures exceeding 80 °C.
NOTE:
The following work steps are described using the "316 i" as the example.