LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2011 >> 335i 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Body Equipment - Repair - E90) >> BMW Emblems, Model Emblems >> 51 14 110 Removing and installing/replacing rear model designation >> M3 only

M3 only

WARNING: This page is about a different variant/trim than selected.

Attach adhesive tape (1) between edge of rear lid (2) and measurement "A".

Mark out measurement "B" at top edge of adhesive tape (1) to outer edge of rear lid.

E90: 

A = 21 mm

B = 147 mm

E92/E93: 

A = 21 mm

B = 139 mm

NOTE: Measurement "C" is for information purposes only, as it is determined by carrier film.

C = 5.9 mm

Fig 1: Identifying Adhesive Tape Applying Area Between Edge Of Rear Lid And Measurement
G06180272Courtesy of BMW OF NORTH AMERICA, INC.