41 63 061 Replacing Soft Top Compartment Lid (Convertible)

Necessary preliminary tasks: 

• Open soft top.

Tape off edge of tailgate in area (1) with plastic adhesive tape.

Courtesy of BMW OF NORTH AMERICA, INC.

Move soft top into position shown.

Switch off ignition. (This depressurizes the system).

Courtesy of BMW OF NORTH AMERICA, INC.

Carry over the work step shown symmetrically to the other side of the vehicle.

Cover areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Carry over the work step shown symmetrically to the other side of the vehicle.

Unscrew nuts (1).

Tightening torque 41 63 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Carry over the work step shown symmetrically to the other side of the vehicle.

Lay soft top compartment lid mechanism (1) in convertible top compartment.

Lower soft top compartment lid.

Courtesy of BMW OF NORTH AMERICA, INC.

Open tailgate with ignition key.

Carry over the work step shown symmetrically to the other side of the vehicle.

Release screws (1).

Tightening torque 41 63 3AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Secure tailgate (1) in position shown.

Feed out soft top compartment lid (2) with aid of a second person in direction of arrow.

Set soft top compartment lid down on a clean support.

Remove COVER FOR SOFT TOP COMPARTMENT LID .

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Install soft top compartment lid at screw locations on hinge.

If necessary, ADJUST SOFT TOP COMPARTMENT LID .