61 67 045 Removing and Installing/Replacing Spray Nozzles For Left Or Right Headlight Cleaning System

WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front bumper trim . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM

Press lock (2) and detach hose connection (1).

Press catch together in direction of arrow and remove spray nozzle for headlight cleaning system (3) towards bottom.

Fig 1: Identifying Lock & Hose Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock catches (1) of trim (3) through punched holes (2).

Remove trim (3) from above.

Fig 2: Identifying Catches, Trim & Holes

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of spray nozzle (1) must not be damaged or missing:

2 Sealing ring

3 Catch

Catches (3) of trim (4) must not be damaged or missing.

Fig 3: Identifying Spray Nozzle, Sealing Ring & Catch

Courtesy of BMW OF NORTH AMERICA, INC.