51 11 701 Replacing left or right bracket for front bumper

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front bumper trim .

Release screws (1).

Remove holder (2) towards bottom.

Fig 1: Removing Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on holder (2) must not be damaged.

Fig 2: Identifying Catches On Holder

Courtesy of BMW OF NORTH AMERICA, INC.