11 43 000 Removing And Installing/Sealing Guide Tube For Oil Dipstick (N62)
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 750i, 2008 BMW 750Li, and 2008 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove INTAKE AIR MANIFOLD .
- Drain engine oil.
NOTE:
For purposes of clarity, this work step is shown on the engine after it has been removed.
Unlock and detach vacuum line (1).
Release screws and remove check valve (2).
Remove guide tube (3) upwards.
Installation:
Replace sealing ring on guide tube.
Apply light coat of oil to seal.
Replacing sealing ring on check valve pipe.
Apply light coat of oil to seal.
Assemble engine.
Check engine for leaks.