61 71 015 Removing And Installing/Replacing A Spray Nozzle In Windscreen Washer System

Unlock retaining clip for water hose (1) and detach water hose in direction of arrow.

Disconnect plug connection (2) and detach in direction of arrow.

Press spray nozzle (3) in direction of arrow (A) and remove at top in direction of arrow (B).

Fig 1: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

• Retaining lugs (1) must not be damaged.
• Check adjustment of spray nozzles  and correct if necessary. See 61 71 004 ADJUSTING WINDSCREEN WASHER SPRAY NOZZLES .
  Fig 2: Identifying Retaining Lugs

  Courtesy of BMW OF NORTH AMERICA, INC.