22 11 110 Replacing Left Engine Support Arm (N52K)
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Secure engine11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N62) . Refer to in installation position
- Remove reinforcement plate. Refer to 31 10 010 REMOVING AND INSTALLING/REPLACING REINFORCEMENT PLATE
- Remove upper section of microfilter housing. Refer to 64 31 081 REMOVING AND INSTALLING/REPLACING MICROFILTER HOUSING
- Remove heat shields
- Remove manifold.
- Remove air ducts
Release screw (1).
Release bracket (2) with oil line.
Release screws and engine support arm.
Tightening torque 22 11 3AZ. Refer to 22 11 ENGINE SUSPENSION .