22 11 011 Replacing Left Engine Mount (N52K)
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Secure engine. Refer to11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N62) in installation position
- Remove reinforcement plate. Refer to 31 10 010 REMOVING AND INSTALLING/REPLACING REINFORCEMENT PLATE
- Remove engine support arm. Refer to 22 11 100 Replacing Right Engine Support Arm (N52K) .
Release screws (1) and remove engine mount (2).
Tightening torque 22 11 1AZ. Refer to 22 11 ENGINE SUSPENSION .
Installation:
Holes (1) in engine mount must point to middle of vehicle.