63 21 101 Replacing sealing frame for left or right rear light (on side panel)
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove REAR LIGHT .
Detach seal for rear light (1) completely from rear light (2).
Clean bonding surface and allow to dry.
Installation:
Make sure seal (1) is correctly bonded all round on rear light (2).