51 49 002 Removing and installing/replacing (upper) panel for rear window frame

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

Remove PANELS FOR REAR WINDOW FRAME on left/right.

Release panel (1) at retainers (2) and remove.

Installation:

If necessary, replace faulty retainers (2).

Fig 1: Identifying Panel And Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lugs (1) on panel (2) must not be damaged.

Fig 2: Identifying Lugs And Panel

Courtesy of BMW OF NORTH AMERICA, INC.