52 26... Removing and installing/replacing ski bag on rear seat

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317 , see 00 9 317 TRIM PANEL WEDGE .

Necessary preliminary tasks:

Remove armrest , see 52 26 030 Removing and installing/replacing armrest for rear seat backrest .

Release screw (1).

Release screws (2).

Tightening torque: 52 26 09AZ , see 52 26 REAR SEATS (THROUGH-LOADING SYSTEM) .

Fig 1: Identifying Ski Bag Screws

G06213210

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 52 26 09AZ , see 52 26 REAR SEATS (THROUGH-LOADING SYSTEM) .

Fig 2: Identifying Ski Bag Screws

G06213211

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out pins.

Fig 3: Identifying Ski Bag Pins

G06213212

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out rear ski bag frame (1) with special tool 00 9 317 .

IMPORTANT: Risk of damage!
Plastic eyelets of front trim ski bag trim can break.
If necessary, replace faulty ski bag trim.

Fig 4: Levering Out Rear Ski Bag Frame

G05779739

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip front ski bag trim (1) towards top.

Installation:

Plastic eyelets of front ski bag trim must not be damaged.

If necessary, replace faulty ski bag trim.

Fig 5: Unclipping Front Ski Bag Trim

G05779738

Courtesy of BMW OF NORTH AMERICA, INC.