32 41 100 Removing and installing/replacing belt pulley on vane pump for power steering
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Carry out preliminary work as described in the information "Replacing drive belt". See 11 28 010 REPLACING ALTERNATOR DRIVE BELT (N54)
or 11 28 010 REPLACING ALTERNATOR DRIVE BELT (N63)
.
Slacken bolts (1)
Relieve tension on drive belt and remove from belt pulley (2). See 11 28 010 REPLACING ALTERNATOR DRIVE BELT (N54) or 11 28 010 REPLACING ALTERNATOR DRIVE BELT (N63) .
Unscrew bolts (1) and remove belt pulley (2).
Installation:
Lettering on belt pulley (2) must point forwards.
Replace microencapsulated screws.
Tightening torque 32 41 2AZ .