LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 2091 (Steering And Wheel Alignment - Repair) >> Pump And Oil Supply >> 32 41 033 Removing and installing/replacing power steering pump for power steering gear with active front steering (N54) >> Screwing sequence

Screwing sequence

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure power steering pump with screws
  2. Tighten side screws to 2 Nm
  3. Tighten front screws to 2 Nm
  4. Tighten down front screws to jointing torque and angle of rotation

    Tightening torque 32 41 3AZ .

  5. Release screws at side and check screw fastening points for gap freedom
  6. Tighten down side screws to jointing torque and angle of rotation

Tightening torque 32 41 3AZ .

scientia non olet · About LEMON Manuals