LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> X5 35d >> Repair and Diagnosis >> External Pages >> Different car >> Section 2091 (Steering And Wheel Alignment - Repair) >> Pump And Oil Supply >> 32 41 033 Removing and installing/replacing power steering pump for hydraulic steering box with active steering (N55) >> Screwing sequence

Screwing sequence

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure power steering pump with screws
  2. Tighten side screws to 2 Nm
  3. Tighten front screws to 2 Nm
  4. Tighten down front screws to jointing torque

    Tightening torque 32 41 9AZ .

  5. Release screw at side and check bolting points for gap freedom
  6. Tighten screws at side to jointing torque.

    Tightening torque 32 41 9AZ .

scientia non olet · About LEMON Manuals