22 11 011 Replacing Left Engine Mount (N63)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Secure engine in installation position. See 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N63) .
Lower front axle support . See 31 11 506 LOWERING/RAISING FRONT AXLE CARRIER (UNIVERSAL LIFTER) .

Release screws (1) and remove engine mount (2).

Tightening torque. See 22 11 1AZ in ENGINE AND GEARBOX SUSPENSION - TIGHTENING TORQUES (N54, N63) .

Fig 1: Identifying Engine Mount And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Holes (1) in engine mount must point to middle of vehicle.

Fig 2: Identifying Engine Mount Holes

Courtesy of BMW OF NORTH AMERICA, INC.