51 14 000 Removing and installing/replacing front BMW badge

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 318 00 9 310 ASSEMBLY WEDGES (SET IN PLASTIC CASE)

Lever out badge with special tool 00 9 318 and remove towards top.

Fig 1: Special Tool (00 9 318)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of badge (1) must not be damaged or missing:

2 Guide pins
3 Grommets

Fig 2: Guide Pins And Grommets

Courtesy of BMW OF NORTH AMERICA, INC.