22 11 110 Replacing left engine support arm (N52K)
WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Secure engine in installation position, see 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N52) .
- Remove the reinforcement plate, see 31 10 010 REMOVING AND INSTALLING/REPLACING REINFORCEMENT PLATE .
Disconnect connector (1).
Detach oil line (2) from engine support arm.
Release screws and remove engine support arm (3).
Tightening torque, see 3AZ in 22 11 ENGINE SUSPENSION .