61 62 110 Removing and installing/replacing spray nozzle for rear window wiper

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317 00 9 310 ASSEMBLY WEDGES (SET IN PLASTIC CASE)

Lever spray nozzle for rear window wiper (1) with special tool 00 9 317 out of spray nozzle holder (2).

Fig 1: Identifying Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure turning lock (2) of spray nozzle for rear window wiper (1) is correctly seated in spray nozzle holder.

Adjust spray nozzle, see 61 62 100 Adjusting jet nozzle for rear window washer unit

Fig 2: Identifying Turning Lock Of Spray Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.