86 10... Disassembly of left and right aprons

WARNING: This page is about a different variant/trim than selected.

Drill out rivets (1) on lower apron edge.

Fig 1: Identifying Lower Apron Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Remove sealing compound (1).

Drill out all rivets (2) along apron edge.

Installation

Use Sikaflex 221 as sealing compound.

Fig 2: Identifying Lower Apron Rivets And Sealing Compound

Courtesy of BMW OF NORTH AMERICA, INC.

Remove sealing compound (1).

Drill out rivets (2) on lower apron edge.

Installation

Use Sikaflex 221 as sealing compound.

Fig 3: Identifying Lower Apron Rivets And Sealing Compound

Courtesy of BMW OF NORTH AMERICA, INC.