61 30 020 Removing and installing/replacing switch block (M3)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

If necessary, remove socket housing (1) from holder (2).

Unlock catches (3) and feed switch block (4) in direction of arrow out of storage compartment trim (5).

Installation:

Make sure switch block catch (4) engages correctly in storage compartment trim (5).

If necessary, make sure socket housing (1) is correctly seated in holder (2).

Fig 1: Removing Switch Block From Storage Compartment Trim

Courtesy of BMW OF NORTH AMERICA, INC.