51 16 212 Removing and installing trim for storage compartment

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks

Version with manual transmission:

Version with automatic transmission:

Release trim (1) with special tool 009317 from retainers (2).

If necessary, disconnect plug connections and remove trim (1) towards top.

Fig 1: Releasing Trim With Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts on trim (3) must not be damaged or missing:

Fig 2: Identifying Trim, Clips And Foam Material

Courtesy of BMW OF NORTH AMERICA, INC.