LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 908 (Heating And Air Conditioning - Repair) >> Heater With Operation >> 64 11 911 Removing and installing/replacing temperature sensor for heating unit (automatic A/C High)

64 11 911 Removing and installing/replacing temperature sensor for heating unit (automatic A/C High)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 745i, 2005 BMW 745Li, 2004 BMW 745i, 2004 BMW 745Li, and 2003 BMW 745i. However, it is still accessible from the selected car via links, so may be relevant.

Remove and install panel for pedal assembly. Refer to 51 45 185 REMOVING AND INSTALLING/REPLACING TRIM FOR PEDAL ASSEMBLY .

Remove center console trim at front left. Refer to 51 16 195 REMOVING AND INSTALLING CENTRE ARMREST (FRONT) .

Remove sound insulation for A/C unit at rear left.

Disconnect plug connection (1).

Fig 1: Pulling Out Temperature Sensor
G03291088Courtesy of BMW OF NORTH AMERICA, INC.

Pull out temperature sensor (2) in direction of arrow.

Installation: 

When installing temperature sensor, pay attention to guide (1) in mount (2).

Fig 2: Identifying Guide In Mount
G03291089Courtesy of BMW OF NORTH AMERICA, INC.