LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Electronic Suspension) >> Removal & Installation >> Valve Block (ARS) >> Installation

Valve Block (ARS): Installation

WARNING: This page is about a different car, the 2002 BMW 745i and 2002 BMW 745Li. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Tighten lines and screws to specification. See TORQUE SPECIFICATIONS  .
  2. Carry out initial dynamic drive operation. See INITIAL OPERATION WITH TEST RUN OF DYNAMIC DRIVE  under BLEEDING HYDRAULIC SYSTEM.
scientia non olet · About LEMON Manuals