65 77 541 Removing And Installing/Replacing Front Left Or Right Acceleration Sensor

WARNING: This page is about a different car, the 2006 BMW 760Li, 2005 BMW 760Li, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Acceleration sensor only fitted in US version!

Necessary Preliminary Tasks:

Remove front bumper trim, refer to 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .

Disconnect plug connection (1).

Release screws (2) and remove acceleration sensor (3).

Fig 1: Retaining Screws, Acceleration Sensor And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Tightening torque, refer to 65 77 9AZ in AUDIO, NAVIGATION AND ANTI-THEFT - TIGHTENING TORQUES .

Replace screws (2).