LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 550 (Lights - Repair Instructions) >> 12 Headlights >> 63 12 950 Replacing a lower holder for headlight mounting

63 12 950 Replacing a lower holder for headlight mounting

WARNING: This page is about a different car, the 2006 BMW 760Li, 2005 BMW 760Li, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Remove complete headlight. Refer to 63 12 001 Removing And Installing/Replacing Left Headlight (From 03/2005) , 63 12 002 Removing And Installing/Replacing Right Headlight , 63 12 010 Removing And Installing Left Headlight (Xenon Headlight)  or 63 12 012 Removing And Installing Right Headlight (Xenon Headlight)  .

Version with headlight cleaning system: 

If necessary, release screws (1) and fold back H.P. nozzle (2).

Fig 1: Screws And High Pressure Nozzle
G04768747

Release screws (1) and remove holder for headlight mounting (2).

Fig 2: Screws And Headlight Mounting Holder
G04768748

Installation: 

Install holder for headlight mounting, tighten screws until hand-tight.

Install headlight and adjust BODY GAP DIMENSIONS

Tighten down screws on holder for headlight mounting.

Fig 3: Headlight Gap Dimensions
G04780431