LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 545 (Body Equipment - Repair Instructions) >> Trunk Latch, Locks >> 51 24 391 Replacing Rubber Mount On Trunk Lid Support

51 24 391 Replacing Rubber Mount On Trunk Lid Support

WARNING: This page is about a different car, the 2005 BMW 760Li, 2004 BMW 760i, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Screw off both rubber buffers (1).

Installation: 

Adjust both rubber buffers (1). Refer to 51 24 004 ADJUSTING REAR LID LOCK (LOWER SECTION OF REAR LID LOCK) 

Fig 1: Removing Rubber Buffers
G03293173Courtesy of BMW OF NORTH AMERICA, INC.