LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 544 (Integrated Suspension Systems - Repair) >> Electrical Components >> 37 14 017 Removing And Installing/Replacing Front Mounted Acceleration Sensor

37 14 017 Removing And Installing/Replacing Front Mounted Acceleration Sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW 760i, 2006 BMW 760Li, 2005 BMW 760i, 2005 BMW 760Li, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection). Refer to 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary Preliminary Tasks: 

Release screws (1).

Disconnect plug connection (2).

Remove front mounted acceleration sensor.

Fig 1: Disconnecting Plug Connection
G03292782Courtesy of BMW OF NORTH AMERICA, INC.