LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 541 (Brakes - Repair Instructions) >> Rear Brakes >> 34 21 171 Removing And Installing/Replacing A Brake Carrier/Brake Guard At Rear

34 21 171 Removing And Installing/Replacing A Brake Carrier/Brake Guard At Rear

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 BMW 760Li, 2006 BMW 760i, 2006 BMW 760Li, 2005 BMW 760i, and 2005 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks: 

Release screws (1) and remove brake carrier (2).

Installation: 

Tightening torque, refer to 34 21 6AZ in BRAKES - TIGHTENING TORQUES .

Fig 1: Removing Brake Carrier Screws
G03292569Courtesy of BMW OF NORTH AMERICA, INC.