LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 368 (Body Equipment - Repair) >> Trunk Latch, Locks >> 51 24 391 Replacing rubber mount on trunk lid support

51 24 391 Replacing rubber mount on trunk lid support

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2007 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Screw off both rubber buffers (1).

Installation: 

Adjust both rubber buffers (1) (work is described in ADJUSTING REAR LID LOCK ).

Fig 1: Adjusting Both Rubber Buffers
G03261616Courtesy of BMW OF NORTH AMERICA, INC.