65 24 020 Removing and installing/replacing blocking circuit (D-pillar)
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks
- Remove REAR GRAB HANDLES .
- Remove BOTH REST SIDE SECTIONS ON REAR SEAT .
- Remove C-PILLAR TRIM PANEL on left and right.
- Remove PANEL FOR ROOF PILLAR AT REAR .
- Detach roofliner mucket in working area.
- Partially detach roofliner in working area.
Disconnect plug connection (1).
Unfasten screw (2) and remove blocking circuit.