27 10 720 Replacing servomotor (ATC 700)

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: After replacement, the "Repair" service function must be carried out with in the BMW diagnosis system.

Necessary preliminary tasks:

REMOVE TRANSMISSION CROSS-MEMBER .

Disconnect plugs (1) and (2).

Tightening torque 27 00 14AZ .

Fig 1: Identifying Servomotor Plugs

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws and remove servomotor from transfer box.

Tightening torque 27 00 13AZ .

Fig 2: Locating Servomotor Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.